Save: $182.04 (39%)
Save: $140.01 (35%)
Save: $132.99 (33%)
Save: $336.04 (41%)
Save: $110.00 (33%)
Save: $217.74 (39%)
Save: $100.05 (67%)
Save: $55.00 (55%)
Save: $70.00 (41%)
Save: $810.04 (60%)
Save: $40.04 (57%)
Save: $59.00 (60%)
Save: $26.00 (63%)
Save: $14.04 (64%)
Save: $18.04 (39%)
Model Number: 56087-1
This is the Traxxas E-Revo Brushless Edition Ready-To-Run Montster Truck. The already-loaded E-Revo Brushless Edition now includes two Power Cell LiPo batteries, two LiPo Balance Chargers, factory installed telemetry sensors, and the TQi transmitter with Docking Base as standard equipment. The two 5000mAh 3-cell LiPos unleash the full fury of the factory-installed and programmed Castle Creations Mamba Monster power system. This heavy-duty setup gives the E-Revo wheel-lifting torque and brutally quick acceleration on the way to over 65mph-and you can prove it!
The E-Revo requires no modifications to handle the extra power; all of the drivetrain and transmission components were designed from the start for exactly this type of high-amp, high-rpm horsepower. Super-Duty Revo driveshafts, Torque-Control slipper clutch, an oversized steel idler gear and rubber sealed bearings are just a few of the features that make E-Revo ready for all the horsepower you can handle.
This E-Revo arrives Ready-To-Race with all the necessary telemetry sensors installed. Traxxas Link also lets you adjust the TQi's pro-level features quickly and easily with its intuitive, high-def, touch-screen interface. While you hone performance with Traxxas Link, recharge the Power Cell LiPos with the included LiPo Balance Chargers for a perfect charge every time, no setting or programming required.
Waterproof MXL-6s Power System
This heavy-duty setup includes a 2200kV motor for full 6S LiPo (25.2 volts max) combatibility, which gives E-Revo the ability to exceed 65mph with wheel-lifting torque and brutally quick acceleration. The MXL-6s controller features a cooling fan and heavy-duty construction with oversized 6.5mm connectors to eliminate "thermaling," and the motor uses a 5mm rotor shaft for added durability. It's all waterproof for no-worry fun in wet conditions that send other trucks running for cover!
The World's Most Advanced Ready-To-Race® Radio System Now Connects Wirelessly to the Traxxas Link App
The Traxxas TQi paired with the Traxxas Link app is the most advanced, feature-rich, Ready-to-Race® radio system available. Now, TQi connects wirelessly to the latest Traxxas Link app for the ultimate in ease-of-use and control. The TQi radio system can be equipped with the Traxxas Link Wireless Module to unlock exciting features such as instant Bluetooth® connectivity; access to the full range of powerful TQi tuning and telemetry tools through an intuitive high-definition graphical interface; and the ability to have a friend remotely monitor real-time telemetry while you focus on mashing the throttle. Your co-driver can even make adjustments for you, remotely, while you drive. No other radio system can do that. Just like the speed and performance Traxxas engineers into the vehicles, the power and capability of TQi and Traxxas Link expands your fun into all-new territory. Only from Traxxas, The Fastest Name in Radio Control®. Learn more about the new Traxxas TQi Radio System here.
Factory-Equipped Real-Time Telemetry
E-Revo Brushless Edition includes factory-installed telemetry sensors enabling Traxxas Link to collect and records real-time telemetry data as you drive. The Traxxas Link dashboard comes to life showing you speed, battery voltage, RPM, and temperature. The application automatically detects and recognizes Traxxas Link sensors for easy set up and configuration. The dashboard is fully customizable with either dial or digital readout gauges. Up to nine gauges can be displayed at once. Set threshold warnings and log maximums, minimums, or averages. Use the recording function to document your dashboard view, with sound, so that you can keep your eyes on your driving and not miss a single apex. If you forget to record, simply touch Instant Replay anytime to capture the previous minute of fun and unexpected triumphs. The recordings can be named, saved, and shared with others.
Intuitive iPhone and iPod touch Interface
Traxxas Link makes it easy to learn, understand, and access the powerful tuning options built into every Traxxas TQi radio system. Control your Drive Effects settings such as steering and throttle sensitivity; steering percentage; braking strength; and throttle trim by simply touching and dragging the sliders on the screen, or enabling the Multi-Function knob on the transmitter. Everything happens live, on-the-fly, giving you instant feedback on your changes.
5-channel Micro Receiver with Fail-Safe Security
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servosÃ¢â‚¬â€no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4Ghz Traxxas Link enabled transmittersÃ¢â‚¬â€just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Traxxas High-Current Connectors
The MXL-6s Brushless Power System comes equipped with two new Traxxas High-Current Connectors. Designed to handle high-current applications, Traxxas Connectors effortlessly funnel the dual battery's total power to the electronics keeping things running cool and at full capacity.
Traxxas Power Cell Batteries Included!
E-Revo Brushless Edition includes two genuine Power Cell Battery Packs to make sure you experience all the performance that's been engineered into your Traxxas model. Power Cell packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and Traxxas' high-output, gold plated, high-current connectors. Seven cell packs give E-Revo Brushless Edition 16.8 volts of motivation for maximum speed, and precision assembly with attractive, individually wrapped cells and clear overwrap complete the Traxxas Power Cell package.
Adjustable Battery Compartments
Keyed, adjustable L-braces located inside the battery compartments allow the battery packs to be positioned in multiple incremental positions from front to rear for precise weight bias tuning. A top mounted, spring loaded clip holds battery packs securely at the lowest point to keep the CG as low as possible.
Battery Cooling Vents
The battery enclosures are vented with artfully designed intakes and exits to provide cooling air to the batteries. Nothing was overlooked in developing the ultimate electric monster truck platform.
Quick Release Battery Doors
The futuristic chassis design incorporates enclosed battery compartments into the sides of the chassis for an ultra-clean look even with the battery packs installed. Innovative quick release battery doors mount directly to the chassis, so there are no clips or hold downs to lose during battery swaps. The doors pivot down using a hinged design and dual clasps secure the tops of the battery doors for impact-proof security. To open the battery doors depress the latches and pull on the battery door tabs. To close the doors simply press on the door until the latches snap into place.
Dual-Servo Steering System
E-Revo takes a total system approach to eliminating the slow, mushy steering response typical on other monster trucks. Each servo is rated for 125 oz.-in. of torque, giving E-Revo a total of 250 oz.-in. of tire-turning twist to keep you in command no matter how tough the conditions.
Heavy-Duty 17mm Hex Hubs
E-Revo Brushless Edition's 17mm splined aluminum hex hubs make certain its considerable horsepower is delivered directly to the treads. The splined design is extra strong with unsurpassed torque handling to resist twist-out no matter how hard the 2200Kv motor pulls at the tires.
Brushless-Ready Heavy-Duty Transmission
The single-speed Brushless-Ready™ transmission features an oversized steel idler gear and a Torque-Control™ slipper clutch to handle the massive torque of the high-performance 2200kV brushless motor. To access spur and pinion gears quickly and easily, a unique single-piece gear cover can be removed and installed with a single hex screw.
Extreme-Duty Torque-Control™ Slipper Clutch
E-Revo Brushless Edition's Torque-Control slipper clutch uses new, aluminum friction pads and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control even with hard-hitting 6S LiPo power. The aluminum friction pads provide smooth, linear engagement you can count on, lap after lap. Spur gears can be removed and replaced without altering the slipper adjustment. A center ball bearing maintains precise, long-lasting alignment with near friction-free running and virtually zero maintenance. The Torque-Control slipper is more than tough enough for E-Revo. Only Traxxas has it!
Sealed Watertight Receiver Box
E-Revo's receiver is fully enclosed for protection from the elements. The antenna and servo wires route neatly through a special watertight seal, and a custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service, and aftermarket receivers can be installed without losing the sealing properties of the box (patent-pending).
Low-CG Transmission Design
Engineered by Traxxas, the ground-breaking molded E-Revo chassis sets a new benchmark for electric monster truck looks and performance. The E-Revo chassis combines art and function to deliver a lightweight, integrated, and rigid platform that maximizes strength and reduces weight. Scalable battery compartments accept a variety of NiMH and LiPo configurations to unlock E-Revo Brushless Edition's power potential. By combining the battery compartments with the chassis design, the battery packs can sit low and close to the center of the truck, plus valuable chassis surface is freed up to accommodate the electronics for a clean layout. This keeps the center of gravity (CG) as low as possible and increases side-to-side agility by keeping most of the weight close to the center.
Innovative Chassis Design
There is no more important single component than the chassis. The chassis construction and rigidity affect all aspects of how you interact with the model. From how it handles to how easily you can install batteries, the E-Revo chassis is both art, and engineering excellence.
Rigidity, Strength, Protection
The smooth center skid plate is by itself a sight to behold while it protects and strengthens. Critical driveline components are shielded from the elements for long life. A cover provides access for maintenance. Careful attention to design raises torsional rigidity to eliminate chassis flex which contributes to E-Revo's stunning handling precision.
Advanced Suspension Design
The superior technology designed into the Revo suspension provides capability, performance, and tuning functions that are so far advanced they set the Revo specification at the absolute pinnacle of monster truck design. Dig into the details and you will see how E-Revo lets you experience precision and performance that's simply not possible with conventional designs. With multiple design patents pending, nothing else even comes close.
The Most Suspension Travel
Revo architecture delivers the most suspension travel possible, tunable progressive damping rates, independent ride height adjustment, and the absolute highest level of control for any situation. The precision aluminum shocks are rigidly mounted to the chassis, protected from dirt, rocks, and crash damage.
Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.
Rubber-Sealed Ball Bearings
Precision rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dirt and nitro environments. They are used in all exposed locations on the truck and are virtually maintenance free.
The E-Revo's fully trimmed and painted ProGraphix body is available in Red, Blue, Red-Black, and Blue-Black. Decals are also applied to save you time and get you driving just minutes out of the box. Traxxas' ProGraphix bodies are the hottest looking bodies around and are only available on Traxxas Ready-To-Race® models.
- TQi 2.4GHz High Output radio system with Traxxas Link Wireless Module™
- TQi 2.4GHz transmitter
- Traxxas Link Wireless Module™
- TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security and integrated telemetry ports
- Factory-equipped with speed/RPM, temperature, and voltage telemetry sensors
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled modelsÃ¢â‚¬â€just switch on and drive, "model selection" is not required
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- Telemetry-ready 5-channel micro receiver with dual channel-1 input
- MXL-6s waterproof electronic speed control
- 6.5mm gold-plated connectors
- Integrated cooling fan
- Heavy-duty construction
- 2200kV brushless motor
- Machined heatsink can
- 5mm rotor shaft
- Brushless-Ready transmission with metal center idler gear
- Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
- Traxxas Power Cell NiMH batteries included
- Unique chassis design with integrated dual battery compartments
- Quick release battery doors
- Battery cooling vents
- Smooth center skid plate shields the driveline
- Sealed receiver box protects the micro receiver from dirt, debris and moisture
- Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
- Hard-anodized PTFE-coated shock bodies with TiN coated shock shafts
- Sealed pivot ball suspension
- Sealed limited slip differentials
- Dual-servo steering system
- Hex hardware throughout
- 3.8" black chrome Gemini™ wheels
- 3.8" Talon™ tires
- Sleek pre-painted body design
- Adjustable rear wing
- Compatible with many Revo® Platinum upgrades
- Traxxas innovation built in!
- Traxxas E-REVO 1:10 4WD 2CH 2.4GHz Brushless RTR Electric RC Monster Truck
- TQi Radio w/ Traxxas Link Bluetooth Connection
- High-Torque Servos
- Two 7 Cell NiMH 3000mAh Batteries
- Mamba Monster Electronic Speed Control
- Traxxas 4-amp DC Peak Detecting Fast Charger
- Length: 22.91 inches (582mm)
- Front Track: 16.38 inches (416mm)
- Rear Track: 16.48 inches (418.5mm)
- Center Ground Clearance: 3.86 inches (98mm)
- Weight w/o Batteries: 9.2lbs (4.17kg)
- Weight with Batteries: 10.9lbs (4.94kg)
- Height (overall): 8.275 inches (210mm)
- Wheelbase: 14.1 inches (358mm)
- Front Shock Length: 87mm
- Rear Shock Length: 87mm
- Front Tires (pre-glued): Talon™ (5.75" x 3.8")
- Rear Tires (pre-glued): Talon™ (5.75" x 3.8")
- Front Wheels: 3.8" Gemini™ (black-chrome) with 17mm splined hex
- Rear Wheels: 3.8" Gemini™ (black-chrome) with 17mm splined hex
- Speed Control Type: MXL-6s Waterproof Forward/Reverse/Brake
- Motor (Electric): Brushless, 2200kV
- Transmission: Single-Speed (2nd gear only)
- Overall Drive Ratio: 18.83 (stock, out-of-box)
- Differential Type: Sealed Hardened Steel Bevel
- Gear Pitch: 32-Pitch
- Chassis Structure/Material: Molded Composite Nylon Tub
- Brake Type: Electronic
- Drive System: Shaft-Driven 4WD
- Steering: Bellcrank
- Radio System: TQi™ 2.4GHz Radio System with Traxxas Link Wireless Module
- Top Speed: 35+mph (65+mph w/ two 3S LiPo Batteries)
- Skill Level: 2
- *Battery Tray Dimensions: 156mm x 50mm x 29mm
- Vehicle: 2 x Traxxas Power Cell NiMH 8.4V 3000mAh 7C Stick Batteries (Included)
- Transmitter: 4 AA Batteries (Not Included)
- Charger: 7.2V or 8.4V Charger (6 or 7 Cell) (Not Included)
For questions regarding this product please email our friendly customer service team.