RECYCLE TIMING - The first delay period begins when the input voltage is applied. At the end of the first delay, or "OFF" period, the internal relay pulls in, and the second delay, or "ON" period begins. When the second delay period ends, the relay drops out. This recycling sequence will continue until the removal of input voltage. When input voltage is removed, the relay drops out.

DPDT, 2 Form "C"

ACCESSORIES
Mounting Styles	Description	NTE Type No.
Surface Mount	8-Pin Octal	R95-101
Panel Mount	8-Pin Octal	R95-118
DIN Rail Mount	8-Pin Octal	R95-113
	8-Pin Octal	R95-181

Dimensional Drawing	Timing Range Chart
D54

Electrical Specifications

Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC,
Pilot Duty 345VA, 120VAC or 240VAC, 50/60Hz
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load

Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart

Timing
Timing Adjustment Modes Available: See Timing Range Chart

Repeat Accuracy
±0.5% - after established at steady temperature (4 hours)
Timing Tolerance at High End of Range: -0, +10%
Timing Tolerance at Low End of Range: +0, -50%
Reset Time: 60mS Typ

Protection
Transient: Surge Test 10,000V for 20mS
Dielectric Breakdown:
             Coil To Contact: 1850 VAC
             Across Open Contact: 1850 VAC

Environmental Characteristics
Operating: -20°C to +55°C

Weight
Std: 4.5 ozs. (130 grams) - approx