HPI Sprint 2 RC Drift Sport RTR w/Nissan 350Z Body Electric RC Car

Based on the popular and durable Sprint 2, this drift version adds specially designed hard compound drift tires pre-mounted on officially licensed replicas of the famous Volk TE37 wheels. Top it off with your choice of two different clear body shells, the legendary Toyota Trueno AE86 or the Nissan 350Z, both supplied with pre-cut vinyl decals and an extra set of drift decals. The chassis is factory assembled right out of the box. The Sprint 2 Drift Assembled is a formidable drift machine that looks and drifts just like the real thing.

Features:

• HPI RTR Sprint 2 Drift 350Z 761
• Chassis: 3/16& (4mm) plastic
• Drive: Four wheel belt drive
• Motor: 15 turn Firebolt, aluminum motor mount
• Radio: HPI TX-2 pistol grip AM 27MHz with steering and throttle trim and reverse and SX-1 steering servo, transmitter has charge jack
• Ball Bearings: Full set included
• Shocks: Oil-filled, plastic bodied, with special springs for drifting
• Differentials: Planetary gear
• Transmission: Single speed
• Tires: Hard compound drift type X-pattern, 1& (26mm) wide, 2.5& (65mm) outer diameter
• Wheels: Officially licensed TE37 Rays/Volk design 5-spoke chrome plated, outer diameter 1.9& (48mm), width 1& (26mm), 3mm offset in front and 6mm offset in rear for wide look seen on full-size drift cars
• Speed Control: Electronic, SC-1 with reverse
• Pinion Gear: 48 pitch steel
• Spur Gear: 48 pitch, 87 tooth, composite construction
• Body: Clear polycarbonate untrimmed Nissan 350Z with rear wing
• Bumpers: Front, foam
• Suspension: Fully adjustable
• Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Steering: Bell-crank type with servo saver
  

Includes:

• HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body
• Motor
• Electronic speed control
• Clear body
• Tires
• Foam inserts
• Wheels pinion gear
• 87 tooth spur gear
• 2-ch radio, servo
• Two decal sheets
• Instructions

Vehicle Specifications:

• Vehicle:
  • Length: 14.5& (369mm)
  • Width: 7.5& (190mm)
  • Height: 5& (127mm)
  • Weight: 3.1 lbs (1410g) approx.
  • Wheelbase: 10& (255mm)
  • Front Track: 7.38& (187.5mm) side to side at outer edges of wheel
  • Rear Track: 7.7& (194mm)
  • Front Tread: 6.5& (166mm)
  • Rear Tread: 6.8& (173.5mm) side-to-side at wheel centers
  • Ground Clearance: 0.31& (8mm)
• Body:
  • Length: 16.5& (419mm)
  • Width: 7.7& (195mm) at rear wheels (widest point) 7.1& (180mm) behind from wheels (thinnest point)
  • Height: 5& (127mm)

Requirements:

• Radio Batteries: (8) AA size
• Battery: 6-cell 7.2V stick with standard connector
• Battery Charger: Timed or peak for 6-cell battery
• Paint: Polycarbonate safe spray or brush-on
• Misc. Items: Building and track equipment