HPI Racing Savage XL 5.9 RTR Nitro RC Monster Truck

The Savage XL is the extra-large, extra-tough and extra-powerful big brother to the Savage X monster truck. For improved stability and handling, the Savage XL has a 55mm longer wheelbase and a 25mm wider track. With a longer wheelbase, wider stance and huge 5.9cc (.36 cubic inch) engine, the Savage XL is ready to rock and roll right out of the box. The HPI design team added strategically strengthened hop-up parts to tame the massive K5.9 power for unmatched durability. The Savage XL soaks up the rough stuff with ease because it's the biggest, toughest, and most powerful Savage ever!

The Savage XL definitely looks the part of the massive monster truck! The extended wheelbase is the perfect evolution of the Savage design, and the extended chassis and larger tires are a perfect match for the new, bigger 'GT Gigante' body!

The wide front grill and huge headlights of the GT Gigante body merge with the flared wheel arches front and rear for a huge 'wow factor,' adding to the impression of huge size and strength! The large Terra Pin tires fit the body perfectly for a scale monster truck look that's sure to intimidate the opposition at your local bashing arena! But the Savage XL isn't about just looking great, the HPI designers went all-out to make sure it performs as good as it looks!

Bigger in every dimension than the standard Savage X, the Savage XL is longer, wider, taller, more ground clearance and tires that are nearly 7 Inches in diameter! It's based on the practically indestructible Savage X chassis and features durability upgrades like thicker 3mm TVP chassis plates, 3mm alloy engine plate, machine-cut steel differential rings and pinion bevel gears, steel spur gear, heavy-duty clutchbell, extra heavy-duty dogbones, larger diff outdrives, machined brake hub, dual fiber disk brakes and much more!

HPI makes it as easy for beginners to get into Nitro RC. The Savage XL RTR it is completely pre-built and ready to go right out of the box! HPI Ready-To-Run models bring you the same high performance and quality that you expect from racing kits with the added convenience of being factory pre-assembled to the highest standards.

Features:

• Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.12 Inches (3mm) thick
• Drive: Four wheel shaft driven
• Engine: HPI Nitro Star K5.9 .36 cu in (5.9cc), ABC cylinder and piston construction, three needle composite bodied slide valve carburetor with 9.5mm inlet, dual stage air filter, starts with included
• HPI Roto Start 2 shaft drive electric starter, one-piece engine mount and 0.12 Inches (3mm) mounting plate
• Exhaust: Polished aluminum two-chamber tuned pipe and polished aluminum manifold
• Radio: HPI TF-3 27MHz FM with steering and throttle trim and servo reversing on both channels, 1200mAh NiMH receiver battery and charger, transmitter does not have charge jack
• Servos: SF-1 standard servo for throttle, SF-5 high torque servo with 8.9kg/cm2 at 6 volts
• Wheels: Chrome plated 2.2 Inches (56mm) wide with 17mm aluminum hex hubs, 3.4 Inches (87mm) diameter
• Tires: HPI Terra Pin with spike pattern for grass and loose dirt and center chevron pattern for directional stability, 7 Inches (178mm) diameter, 3.35 Inches (85mm) wide
• Shocks: Eight long-stroke oil-filled Fuel Tank: 5.4oz (160cc), flip top cap
  Clutch: Three shoe aluminum
• Clutch Bell: Heavy duty steel construction, vented 16 tooth
• Body: Painted and trimmed 0.60 Inches (1.5mm) thick polycarbonate GT Gigante monster truck, body color is blue or orange
• Suspension: Double wishbone with lightweight suspension arms
• Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Brake: Machined steel hub and dual red fiberglass brake discs
• Transmission: Three-speed with metal gears and adjustable shift point
• Differentials: Alloy cases with with machined steel rings and pinion bevel gears with new larger machined steel diff outdrives and axles
• Slipper Clutch: Heavy duty dual slipper plates and shock absorbing rubber pad
• Spur Gear: Machined steel 52 tooth
• Ball Bearings: Full set, rubber sealed Steering: Bell crank with cam-type servo saver steering arms

Includes:

• HPI Racing Savage XL 5.9 RTR Nitro RC Monster Truck
• Roto Start Electric Starter
• Glow Plug
• Air Filter
• 2-Channel Radio
• Standard Throttle Servo
• Hhigh-Torque Steering Servo
• Hump receiver Pack
• Wall Charger
• Painted and Trimmed Body
• Instruction Manual

Specifications:

• Scale: 1:10
• Power: Electric
• Type: Off Road
• Length: 550mm
• Width: 293mm
• Weight: 2080g
• Wheelbase: 327mm
• Internal Gear Ratio: 2.6:1
• Drive: 2WD
• Track: 245mm
  

Requirements:

• Radio: 8 AA Alkaline Batteries (NOT Included)
• Fuel: 10% or 20% Nitro (NOT Included)
• Roto Start Battery: 7.2V stick pack with standard connector (NOT Included)
• Roto Start Battery Charger: Timed or Peak for Roto Start Battery (NOT Included)
• Glow Starter (NOT Included)
• Fuel Bottle (NOT Included)
• Track Equipment (NOT Included)