New from Hot Bodies, the E-Zilla 10 is a massive1/10-scale electric monster truck featuring two powerful 550 motors. The twin motor and twin battery design offers an immense amount of power and speed, mated to a large-capacity twin plate slipper clutch. The specially designed electronic speed control offers built-in protection from overheating and automatic setup, making the E-Zilla 10 easy to use. It even includes two 7.2v batteries and a high-performance quick charger that can peak charge two batteries at the same time. The symmetrical 4WD layout transfers the power through lightweight universal drive shafts to offer lower resistance and more speed.
Watch below to see a video of the E Zilla in action!
Features: Chassis: Aluminum TVP (twin vertical plate) type 0.098" (2.5mm) thick with V-shaped battery layout for low center of gravity Drive: Four wheel drive Drive Type: Shaftdriven Motors: Two 550 size with cooling fans attached to rotors Speed Control: Electronic with self-selecting neutral, and built-in warning and protection circuit and fully automatic setup Batteries: Two 7.2V NiCd stick packs 2000mAh with standard connector Charger: 12V DC, charges both batteries at once with cigarette lighter adapter, 1, 2 and 4amp charge rate switch for each output also has power supply adapter and two battery leads, charges NiMH and NiCd batteries Radio: Hot Bodies HT-2 AM 27MHz pistol grip with servo and throttle reverse and trim, steering dual rate and two standard servos, transmitter does not have charge jack Transmission: One speed Slipper Clutch: High capacity twin plate design attached to spur gear protects drive system from impact during jumping Ball Bearings: Fully equipped, 22 total Shocks: Eight oil-filled, long travel plastic bodied w/coil-over spring Main Gear: 66 tooth, Gearbox: Sealed front, rear and center Differentials: Planetary geared, metal geared Tires: Rubber treaded Baja type 5.4" (138mm) diameter, 2.7" (70mm) wide Wheels: 5-spoke chrome monster truck 3.5"(89mm) diameter, 2.2" (56mm) wide, also fits on HPI Savage Body: Highly detailed baja inspired VW Beetle painted red-orange with black stripes, light, window and net decals Bumpers: Front and rear plastic Suspension: Front and rear double wishbone Camber: Non-adjustable Steering Tie Rods: Non-adjustable Steering: Bell crank type Servo Saver: Included
Includes: Hot Bodies E-Zilla electric monster truck with 8 oil-filled shocks, 20 tooth pinion gear, 66 tooth spur gear, painted body, tires with foam inserts, wheels, radio system, two 7.2V batteries, two 550 size motors, electronic speed control, illustrated instruction manual, 12V charger w/battery leads and power supply adapter
Hot New Products
RC Cars
driven Motors: Two 550 size with cooling fans attached to rotors Speed Control: Electronic with self-selecting neutral, and built-in warning and protection circuit and fully automatic setup Batteries: Two 7.2V NiCd stick packs 2000mAh with standard connector Charger: 12V DC, charges both batteries at once with cigarette lighter adapter, 1, 2 and 4amp charge rate switch for each output also has power supply adapter and two battery leads, charges NiMH and NiCd batteries Radio: Hot Bodies HT-2 AM 27MHz pistol grip with servo and throttle reverse and trim, steering dual rate and two standard servos, transmitter does not have charge jack Transmission: One speed Slipper Clutch: High capacity twin plate design attached to spur gear protects drive system from impact during jumping Ball Bearings: Fully equipped, 22 total Shocks: Eight oil-filled, long travel plastic bodied w/coil-over spring Main Gear: 66 tooth, Gearbox: Sealed front, rear and center Differentials: Planetary geared, metal geared Tires: Rubber treaded Baja type 5.4" (138mm) diameter, 2.7" (70mm) wide Wheels: 5-spoke chrome monster truck 3.5"(89mm) diameter, 2.2" (56mm) wide, also fits on HPI Savage Body: Highly detailed baja inspired VW Beetle painted red-orange with black stripes, light, window and net decals Bumpers: Front and rear plastic Suspension: Front and rear double wishbone Camber: Non-adjustable Steering Tie Rods: Non-adjustable Steering: Bell crank type Servo Saver: Included 
front-to-rear Front Tread: 11.85" (301mm) Rear Tread: 11.12" (284mm) wheels on-center side-to-side Front Track: 14.13" (359mm) Rear Track: 13.75" (349mm) outer edges of wheels Ground Clearance: 2.25" (57mm) Gear Ratio: 16.75:1 Tires- Front and Rear: 5.4" (138mm) diameter, 2.7" (70mm) wide Body- Length: 15.3" (388mm) Width: 6.9" (175mm) in front of rear wheels (widest point) 6.4" (163mm) behindfront wheels (narrowest point) Height: 4.9" (124mm)
